|
|
|
|
|
|
|
|
|
|
|
|
|
|
ELECTROMAGNETIC KITCHEN VENT AP500 ( MAGNET IS STRONG ENOUGH TO KEEP THE FLAPPER AIR TIGHT EVEN IN STRONG WINDS) TURN ON THE FAN AND PUSH THE RELEASE BUTTON TO POP OPEN THE FLAPPER----- THE ONLY WORTH WHILE SIDE VENT TO PUT ON YOUR COACH.HIGHLY RECOMENDED.
|
EIGHT RELOCATED MOUNTING HOLES TO ALLOW FOR MORE SECURE MOUNTING.( OLD MOUNTING HOLES ARE USUALLY ROTTED OUT )------FLAPPER AND STAINLESS STEEL FASTENERS INCLUDED
|
****REPLACE OLD HOOD LATCH WITH THIS NEW SPRING LATCH SYSTEM. EASY TO INSTALL.SOLD IN PAIRS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mirror Head Support - Original style. (one) GMC Motorhome
|
Ramco Mirror Gasket
SOLD IN PAIRS ONLY
For those of you who are, like me, concerned about the small details here is a gasket that is designed to fill the gap between the body and the Ramco mirror arms. This gap can also allow water to enter through the wiring hole unless properly sealed and is caused because the head of the caged retaining nuts are above the surface of the body by about 1/10th of an inch. This gasket is designed to go around these protruding heads and thus fill the gap. The hole in the center is for wiring to the mirror for those that have these options.
|
One kit does both left and right sides. ARMS NOT INCLUDED
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual flat glass and manual convex glass. One kit does both left and right sides.
|
Remote flat glass and manual convex glass. Kit includes mirror heads, arms machined to fit your GMC, wiring harness, control and instructions. This is an important modernizing update. This one change makes the whole RV look much newer.
One kit does both left and right sides.
|
Remote flat glass and manual convex glass-Heated.
Kit includes mirror heads, arms machined to fit your GMC, wiring harness, control and instructions. This is an important modernizing update. This one change makes the whole RV look much newer.
MARK OPTION IF IT IS A 1978
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote flat glass and convex glass-Heated.
One kit does both left and right sides.
|
New Flexible Fiberglass wheel well.
CLICK PICTURE FOR PRICE
Note: all fiberglass products may require some finish work
|
SET OF 10 SCREWS AND CLIPS ENOUGH FOR BOTH INNER WELLS
|
|
|
|
|
|
|
GM23-100.2-1.jpg?v-cache=1567085816 "Wire Harness for Electric Windshield Wiper Motor")
|
|
|
|
|
|
|
|
|
|
WIPER MOTOR FILTER ASSEMBLY- RECONDITIONED
$20 CORE CHARGE INCLUDED
|
Contains a mounting bracket which uses the original three bolt holes. The bracket provides an idler arm which exactly duplicates the location and motion of the original arm on the hydraulic motor. Some additional adjustability is provided for minor improvement of the wiper arm motion. All of the steel components are CNC machined and black powder coated. . Please note that this
DOES NOT INCLUDE THE ELECTRIC MOTOR AND WIRE HARNESS.
|
GMC Wire Harness for Electric Windshield Wiper Motor - GMC Motorhome
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used windshield motor switch and cable
|
THIS BLADE ONLY FITS THE( NEW STYLE WIPER ARM KIT) THAT WE SELL-- PRICED OUT EACH
|
COMES WITH NEW FASTENERS AND CLIP EACH SIDE IS $16.98 GM23-100 (NOTE THESE WIPER BLADES FIT THE ORIGINAL STYLE ARM ONLY)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SOLD IN PAIRS. THIS PART IS HARD TO FIND!
|
REBUILT REBUILT REBUILT REBUILT
Electric Windshield Wiper Motor.
NEW MOTORS NO LONGER AVAILABLE
|
SOLD IN PAIRS ONLY. NEW STYLE REFURBISHED WIPER ARM WITH NEW BLADES AND WASHERS.MOUNTING HOLES MACHINED WITH CONSTANT TAPERED FOR STRENGTH.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stop those hydraulic motor leaks. Get your motor rebuilt now.
PLUS CORE $100.00 Required
|
NEW ELECTRIC WIPER MOTOR CONNECTOR
|
Wind Wings - Keep cool without running the A/C! Deflect the cool outside air into driver and passenger areas.
Mounts easily onto vertical (A) post between windshield and sliding window. Available tinted or clear.
CLICK PICTURE FOR PRICE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CURVED CLEAR PLEXI-GLASS WINGS ON AN ADJUSTABLE CAST ALUMINUM BASE. MOUNTS ON VERTICAL POST BETWEEN WINDSHIELD AND SLIDER WINDOW WITH 2 STAINLESS SCREWS PER SIDE DEFLECTS COOL AIR INTO DRIVER AND PASSENGER AREA.
|
GMC MOTORHOME FITS 73-78 YEARS.FOR BOTH 23FT & 26FT.
THE REAL THING!
|
If you have a ladder, you have extra storage!
Try a pair of our cast aluminum "clamp -on" brackets. Carry bicycles, chairs, luggage, etc.
Fits any ladder 3/4" to 1" diameter.
Folds away when not in use. Ball burnished to a shiny finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardware and instructions for you to custom fit, assemble and mount to your coach. Includes cast aluminum steps, tubing and stainless steel screws. All castings are ball burnished.
|
Electric Hide-Away Step
An alternative to the Ragusa step. Automatic extension upon door opening/closing.
Extends out 12 inches for your safety and retracts in to avoid hitting curbs.
|
HEAVY DUTY COMMERCIAL RATED STEP. CAN BE SET TO STAY OPEN WHEN CAMPING & CLOSE WHEN ENGINE IS STARTED TO MOVE.
Easy installation. Simple operation.
*Ball Burnished Finish* (Shiny finish)
Non Burnished
|
|
|
