Home > PRODUCTS > EXHAUST SYSTEM
Sort By:
Page of 1
VIDEO 3" STAINLESS STEEL MUFFLER ONLY 2.5 STAINLESS STEEL MUFFLER
https://www.youtube.com/
@motorhomerehabranch/vide
FLOW MASTER DESIGN REPLACES ALUMINIZE ONES
 		2.5 IN / 2.5 OUT OFFSET MUFFLER. OVAL,22" LENGHT BIDIRECTIONAL ALL STAINLESS STEEL
2.25 ALUMINIZE ALL WELDED MUFFLER EXHAUST DOWN PIPE FOR STOCK MANIFOLD NO- WELD 02 SENSOR MOUNT
NO- WELD 02 SENSOR MOUNT
Our Price: $49.98
2.25 IN/ 2.25 OUT 18" LENGHT OFFSET OVAL ALUMINIZE ALL WELDED MUFFLER HEAVY DUTY EXHAUST DOWN PIPE FOR STANDARD EXHAUST MANIFOLD. MUST INDICATE 455 OR 403. ALSO INDICATE PASSENGER OR DRIVER SIDE. PRICE EACH NOT PAIR.
Exhaust Heat Shields GMC Motorhome MUFFLER HEAT SHIELD SPRING LOADED EXHAUST BOLT
MUFFLER HEAT SHIELD
Our Price: $39.95
Exhaust Heat Shields for Fuel Tanks


Here is a kit of items to shield the heat from the exhaust pipe to the fuel tank.The factory installed these shields to help minimize problems of overheating the fuel and vaptor lock.
The 20 gauge steel heat shielas are power coated white to minimize the heater transfer to the tank through absorption and re-radiation.these shields are like the original heat shield swhich had 3/8" bend on both sides, but I extended the upper bend, which installs over the exhaust pipe to 2" to provide additional heat isolation to the fuel tank. 		MUFFLER HEAT SHIELD GMC MOTORHOME
Keep the pipes tight with these spring loaded exhaust
bolt.
Note: these are the bolts that hold the exhaust pipe to the exhaust manifold
MUFFLER BEARING Exhaust Mainfold Bolt Locks LOCKING HEADER BOLTS
LOCKING HEADER BOLTS
Our Price: $34.95
TO REPLACE THE DETERIORATED HIGH TEMPERATURE RUBBER AND RETAINER CUP. STAINLESS STEEL PAINTED.
CLICK PICTURE FOR PRICE
 		The original exhaust manifold bolts lock system for some reason completely ignores the center bolt. We have developed a bolt lock system that applies to the manifold bolts in exactly the same manner at the originals but has the added feature of providing a locking function to the center bolt.We believe that the use of our 5-bolt lock will provide a significant improvement to the longevity of the exhaust manifold gasket.

The lock plates are CNC machined from 18 gauge galvanized sheet steel, sold as a pair to do both exhaust manifolds, and are shipped with a tips sheet providing installation suggestions.
RESISTS VIBRATING LOOSE-- SUPER HARD CAM LOCKING WASHERS -- NO LITTLE CLIPS OR RETAINERS TO HANDLE---OIL ACTUALLY IMPROVES PERFORMANCE --- ECONOMICAL AND REUSABLE KIT INCLUDES 12 BOLTS 3/8 X 1"
STAINLESS STEEL HEADERS ( NOT AVAILABLE) Doug's Headers - High Temperature Coated Copper Exhaust Gasket By Dave Lenzi
ALL STAINLESS STEEL HEADERS COMES WITH REDUCERS BOLTS AND REMFLEX GASKETS. GOVERNOR IS ACCESSIBLE
 		Designed SPECIFICALLY for the GMC MOTORHOME to produce Low End Torque. Comes with oxygen sensor ports.
Headers greatly reduce engine temperature by more efficiently drawing the exhaust gasses out. Lowering the temperature of the cylinder and the combustion chamber creates a denser fuel charge and therefor allows your engine to create more power.
HIGHLY RECOMEND REPLACING LOWER OIL DIP STICK TUBE

Ceramic coating is a high luster silver color that will not discolor with the introduction of heat and is more resistant to corrosion and heat at even higher temperatures. It creates a thermal barrier which lowers the understood temperature and adds life to your headers. The approximate dimensions of the package is 36hx20wx16L
Embosed Copper Exhaust Manifold Gasket
FOR STANDARD MANIFOLD NOT FOR HEADERS
Remflex HEADER Gasket SOLD IN PAIRS REMFLEX EXHAUST MANIFOLD GASKET Thorley Header Gasket - GMC Motorhome
REMFLEX HEADER GASKET SOLD IN PAIRS
 		STOCK EXHAUST MANIFOLD GASKET SOLD IN PAIRS
Thorley Header Gasket

GM12-030.1 SOLD IN PAIRS ONLY
EXHAUST BLOCK OFF PLATE W/ GASKET Stainless Steel Mandrel Bent Exhaust System MUFFLERS BACK Aluminunized Mandrel Bent Exhaust System
WITH STAINLESS STEEL EXHAUST BLOCK OFF PLATES AND A SPECIAL GASKET TO WORK IN CONJUNCTION WITH THE PLATES
CLICK PICTURE FOR PRICE

*8 Year Warranty on All Parts

Style 1 and Style 2 :

Style 1 using 2 each magna flow mufflers and Style 2 using one CUSTOM STAINLESS STEEL FLOWMASTER DESIGN muffler at the rear. Stainless steel band clamps come with the stainless steel kit

2.5" and 3" Mandrel bent stainless steel pipes
CLICK PICTURE FOR PRICE

*8 Year Warranty on All Parts

Style 1 and Style 2:

Style 1 using two each Magna flow muffler and Style 2 using one each CUSTOM STAINLESS STEEL FLOWMASTER DESIGN MUFFLER at the rear with Non-band clamps

2.5" and 3" Mandrel bent aluminized steel pipes
CLICK PICTURE FOR PRICE

Installation Instructions
EXHAUST HEADERS FOR 500 CID ALUMINUM HEADER GASKETS ( REUSABLE ) ( PAIR ) HEADER COLLECTOR KIT
HEADER COLLECTOR KIT
Our Price: $59.95
HEADERS FOR YOUR 500 CID CADILLAC ENGINES THAT FITS THE GMC MOTORHOME
OPTIMUM SEAL FOR HEADERS--- FILLS GAPS IN DISTORTED/WARPED FLANGES ----MADE FROM DEAD SOFT ALUMINUM WILL NOT SHRINK,DETERIORATE OR BLOW OUT-- AND IT'S REUSABLE!!!!!
 		THESE ARE FOR THE DOUG HEADER WITH THE BONG FOR OXYGEN SENSOR. THIS IS NOT FOR THE OLD Thorley HEADERS. THE LONGER PIPE GOES TO THE DRIVERSIDE AND THE SHORTER ONE GOES TO THE PASSENGER SIDE.
EXHAUST MANIFOLD SEAL
EXHAUST MANIFOLD SEAL
Our Price: $25.00
EXHAUST SEAL