Skirt Lifter Kit by John Chalfant.
New for the Quadra Bag Suspension system! Now you can lift your skirts & show em what you’ve got! Check your airbag pressures, twist your valves and rinse off those airbags anytime! Kit is available also for single bag units.( NOTE T- SKIRTS NOT INCLUDED )
MONO BAGS KIT - GMC MOTORHOME
COMES COMPLETE WITH BAG & HARDWARE.OUR MONO BAGS ARE SUPERIOR TO THE SU BAG SYSTEM.COMES ASSEMBLED WITH AIR FITTINGS READY TO DROP IN. NO ASSEMBLY REQUIRED. UTILIZING THE DEPENDABLE FIRESTONE AIR BAGS WO13589294 SAME USED IN SULLY BAG SYSTEM AND POWDER COATED HARDWARE.DESIGN OF SYSTEM WAS DERIVED FROM A GMC MOTORHOME OWNER THAT POSTED WHAT HE DID USING THE AIR BAGS THAT WERE USED ON THEIR TRUCK FLEET.THIS SYSTEM OPERATES ON SLIGHTLY LOWER AIR PRESSURE, YET HAS ABOUT THE SAME CHARACTERISTIC AS THE ORIGINAL AND VERY DEPENDABLE.
SHOULD YOU BE USING TIRES LARGER THAN STANDARD? THERE WILL BE NO ADJUSTMENT MADE WHEN THE TIRES RUB A HOLE IN THE BAG.
STANDARD SIZES: 8.75X16.5 AND 225-75-16
Quadra Bag 4 Bag Rear Suspension System - GMC Motorhome
Systems available in black as shown or in zinc plating Features:Quadra Bag Installation Instructions
Quadra Bag Diagram
-2 piece construction for easy bolt in installation in about 4-6 hrs.
-Outboard air line connections to air bags for easier connections.
-Heavy gauge steel construction
-Larger, more weight carrying air bags
-Safe and convenient ability to travel to a repair shop in the case of an airbag blowout.
-Lower air pressure requirements.
-More travel up and down for height adjustment.
-Back rear tire skidding is minimized by 60%
-T-Skirts can still be used by utilizing a special mount.
"With this kit, your coach will have a full 6 wheel independent suspension!"-Jim Bounds
WIRELESS AIR - GMC MOTORHOME
REMOTE CONTROL - WIRELESS DIGITAL CONTROLLER CONTROL PRESSURE FROM DRIVER SEAT. COMES FULLY ASSEMBLED AND MOUNTED IN A PVC SUPPORT PLATE. CHOICES COME IN COMPLETE PACKAGE OR PACKAGE WITH OUT AIR TANK.COMES READY TO DROP IN.JUST CONNECT 3 WIRES AND 2 AIR LINES.
WE WILL CREDIT $60.00 FOR USED ELECTRONIC HEIGHT CONTROL THAT TEST OUT GOOD AND $15.00 IF THEY DONT TEST OUT GOOD.
TUBING FOR SUSPENSION - GMC MOTORHOME
Tubing for suspension.
Please enter how many feet you will need at checkout. Quanity 1 = 1 foot.
Rear Suspension Pin Set - GMC Motorhome
New 1 1/4" and 1 1/2" Bogie pins kit with 2 grease supply holes. HEAT TREATED,HARDENED & GROUND.
Special Line Reamers are available for rent with purchase.
Grease Fitting Covers - GMC Motorhome
Grease Fitting Covers (25 PER PACKAGE)
These covers are an excellent way to keep your grease fittings clean so that dirt is not forced in along with the grease. It is not necessary to completely remove the cover when applying the grease.Covers are bright yellow for easy identification and location.
SLONOID SPANNER WRENCH
when one cannot find visual leaks, it is time to disassemble the valve using this special tool and check for particles that is preventing a complete seal.
Bogie Pin Greaser Kit - GMC Motorhome
Greasing the rear bushings in a GMC have always been problematical. This kit makes it a snap! DOES NOT WORK ON 1973 AND 1974 YEARS. Includes four greasers
Bogie Greaser Installation Instructions:
Clean out the grease channel as follows:
#1 - Remove existing grease fitting
#2 - Insert a plastic straw at least 8 inches into opening (McDonald's straws work great!)
#3 - Twist straw several times
#4 - Place finger on end of straw to create a vacuum and remove
#5 - Insert Bogie Greaser into opening and grease both Zerk fittings
#6 - Repeat process for the remaining three pins